View EGP30A_1122206.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EGP30A THRU EGP30K
3.0 AMPS. Glass Passivated High Efficient Plastic Rectifiers
Voltage Range 50 to 800 Volts Current 3.0 Amperes
Features
Plastic material used carries Underwriters Laboratories Classification 94V-O Glass passivated cavity-free junction Superfast recovery time for high efficiency Low forward voltage, high current capability Low leakage current High surge current capability High temperature metallurgically bonded construction High temperature soldering guaranteed: 300 / 10seconds, .375"(9.5mm) lead length at 5 lbs., (2.3kg) tension
DO-201
Mechanical Data
Case: JEDEC DO-201 molded plastic over solid glass body Lead: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.048 ounce, 1.28 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol EGP EGP Type Number 30A 30B Maximum Recurrent Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100
Maximum Average Forward Rectified Current 0.375"(9.5mm) Lead Length @ TA = 55 Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 3.0A Maximum DC Reverse Current @ TA=25 at Rated DC Blocking Voltage @ TA=125 Maximum Reverse Recovery Time ( Note 1 ) o TA=25 C Typical Junction Capacitance ( Note 2 ) Typical Thermal Resistance (Note 3) Operating and Storage Temperature Range
EGP EGP EGP EGP EGP Units 30D 30F 30G 30J 30K
200 140 200
300 210 300 3.0 125
400 280 400
600 420 600
800 560 800
V V V A A
I(AV) IFSM VF IR Trr Cj RJA
0.95
1.25 5.0 100 50
1.7
V uA uA
75 50
nS pF /W
60 40 -65 to + 150
TJ TSTG Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0V D.C. 3. Mount on Cu-Pad Size 16mm x 16mm on P.C.B.
- 590 -
RATINGS AND CHARACTERISTIC CURVES (EGP30A THRU EGP30K)
FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
50W NONINDUCTIVE 10W NONINDUCTIVE +0.5A (-) DUT (+) 50Vdc (approx) (-) PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) (+) 0 -0.25A trr
NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms
-1.0A 1cm SET TIME BASE FOR 5/ 10ns/ cm
AVERAGE FORWARD CURRENT. (A)
3.0
FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE
RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH
FIG.5- TYPICAL REVERSE CHARACTERISTICS
100 Tj=150 0C
INSTANTANEOUS REVERSE CURRENT. ( A)
2.0
10
Tj=125 0C 1
1.0
0 0 25 50 75 100
o
125
150
175
0.1
Tj=75 0C
AMBIENT TEMPERATURE. ( C)
PEAK FORWARD SURGE CURRENT. (A)
FIG.3- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
175 150 125 100 75 50 25 Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method
0.01 Tj=25 0C 0.001 0 20 40 60 80 100 120 140
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
FIG.6- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
50
PULSE WIDTH-300 S 1% DUTY CYCLE
INSTANTANEOUS FORWARD CURRENT. (A)
0
1
10 NUMBER OF CYCLES AT 60Hz
100
10 Tj=150 0C
FIG.4- TYPICAL JUNCTION CAPACITANCE
210
1 Tj=25 0C
JUNCTION CAPACITANCE.(pF)
180 150 120 90 60 30 0 0.1 EGP30A-EGP30D EGP30F-EGP30K 1
Tj=25 0C f=1.0MHz Vsig=50mVp-p
0.1
EGP30A-EGP30D EGP30F EGP30K 0.01 0.2 10 100 1000 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
FORWARD VOLTAGE. (V)
REVERSE VOLTAGE. (V)
- 591 -

▲Up To Search▲

Price & Availability of EGP30A

	To Download EGP30A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .